PRICES - RIGGING FOR YOUR AIRCRAFT FLOATS
Prices in US Dollars, EX-Works Midland, Ontario, CANADA. Subject to changes without notice.
Prices in US Dollars, EX-Works Midland, Ontario, CANADA. Subject to changes without notice.
We keep a supply of aircraft tubing, such as thin-walled and stream-lined tubing; we also carry a number of machined fittings for perfectly alined joints between spreader-bars and struts.
Aircraft Floats Mfg. now offers a complete line of mounting accessories and components to help you install floats to your aircraft.
Prices for all these components are listed below (just scroll down as needed). These include:
Prices for all these components are listed below (just scroll down as needed). These include:
|
1) NEW Generic Rigging Kits - Now available from Aircraft Floats Manufacturing
2) Individual Rigging Components - "a la carte" from the new Rigging Kits 3) Special Components made especially for the Kitfox IV - add to Rigging Kit for the Kitfox 4) "Old Mounting Components" - originally offered by Full-Lotus Manufacturing |
1) NEW AFM RIGGING KITS (click here for full description)
|
FL-ESPK................STANDARD RIGGING KIT (for floats up to #1450)................................. $1,450.00 FL-ELPK................STANDARD RIGGING KIT (for floats #1650 and above)......................... $1,800.00 |
|
2) INDIVIDUAL RIGGING COMPONENTS (included in the NEW AFM Rigging kits)
AVAILABLE FROM AIRCRAFT FLOATS MFG. |
|
SPREADER-BARS and STRUTS:
Order the material you will need and cut it to length for your particular installation. (Note: The height and the width of the rigging can vary depending on specific needs (i.e. height of plane on floats; width of floats - to fit a trailer, ramp or hangar)...
Order the material you will need and cut it to length for your particular installation. (Note: The height and the width of the rigging can vary depending on specific needs (i.e. height of plane on floats; width of floats - to fit a trailer, ramp or hangar)...
|
SSM5..............5" STREAMLINED SPREADER BAR MATERIAL (7ft).........................$235/7ft. or $35.50/ft
(Inside height is 1.5"; weight of 7ft length is 7.2 lbs.) SSM3.............3.125" STREAMLINED STRUT MATERIAL (up to 7ft)...........................$178/7ft. or $26.50/ft (Inside height is 1"; weight of 7ft length is 4.5 lbs.) |
INDIVIDUAL FITTINGS (NEW):
These individual components are newly available for the installation of Full-Lotus floats and will simplify the rigging process on a variety of aircraft.
These individual components are newly available for the installation of Full-Lotus floats and will simplify the rigging process on a variety of aircraft.
|
FL142..............STRUT FITTING (for floats up to #1450).......................................................... $ 32.00 each 22-F11-1.........STRUT FITTING (for floats #1650 and above).................................................. $ 39.00 each |
|
FL141..............FRONT LINK FITTING (for floats up to #1450)................................................. $ 31.00 each 22-F11-2..........FRONT LINK FITTING (for floats #1650 and above)........................................ $ 38.00 each |
|
FL143..............PICK-UP FITTING (for floats up to #1450)....................................................... $ 27.00 each 22-F11-3..........PICK-UP FITTING (for floats #1650 and above).............................................. $ 34.00 each |
|
FL144..............REAR LINK FITTING (for floats up to #1450)................................................. $ 28.00 each 22-F11-4..........REAR LINK FITTING (for floats #1650 and above)........................................ $ 35.00 each |
|
FL-E01S........SPREADER BAR ATTACHMENT CHANNEL (NEW)........................................ $35.00 each For use with stream-lined spreader bars as supplied in our rigging kits - see FL129 / 22-F11-6 above. (Supplied un-drilled as shown in picture) |
|
|
FL-E01.........SPREADER BAR ATTACHMENT CHANNEL.................................................... $23.00 each For use with square-tube spreader bars or flat-sided fittings (Now supplied un-drilled as shown in picture) |
|
|
FL-E02.........INBOARD SPREADER BAR SPACER.............................................................. $ 9.00 each (Now supplied un-drilled as shown in picture) |
|
|
FL-E03.........OUTBOARD SPREADER BAR SPACER.......................................................... $ 3.50 each (Now supplied un-drilled as shown in picture) |
FITTINGS PACKAGES:
Our fittings packages include: 6 Strut Fittings, 2 Front Link Fittings, 2 Rear Link Fittings and 4 Pick-up fittings (no hardware included).
FL-EXS............FITTINGS PACKAGE (for floats up to #1450)..............................................$ 410.00/pkg.
FL-EXL............FITTINGS PACKAGE (for floats #1650 and above).....................................$ 495.00/pkg.
Our fittings packages include: 6 Strut Fittings, 2 Front Link Fittings, 2 Rear Link Fittings and 4 Pick-up fittings (no hardware included).
FL-EXS............FITTINGS PACKAGE (for floats up to #1450)..............................................$ 410.00/pkg.
FL-EXL............FITTINGS PACKAGE (for floats #1650 and above).....................................$ 495.00/pkg.
Fittings Package for FL950 to FL1450 Floats. (kit weight: 2.9 lbs / 1.32 kg)
|
Sample Front Fittings Assembly
|
Sample Rear Fittings Assembly
|
Fittings Pkg for FL1650-2600 Floats. (kit weight: 8.2 lbs / 3.72 kg)
|
- For more information about the required "STIFFENER TUBES" that are not included with the standard Full-Lotus floats or with our standard Rigging Kits, click HERE.
- Click here to place an order.
3) SPECIAL FITTINGS FOR THE KITFOX IV AIRCRAFT DESIGN:
|
New top-link fittings are now available from Aircraft Floats manufacturing, Inc. specifically designed for the KITFOX aircraft. These custom-fittings link the aircraft fuselage to the top of the float struts. The CNC machined parts are made of light-weight aluminum and are designed to fit standard Kitfox landing-gear brackets; they then perfectly match the streamlined struts provided with the standard float rigging kit listed above. Two of each are required, plus six Strut Fittings (P/N FL142) for a typical Kitfox set-up.
|
|
|
KITFOX IV FITTINGS (sold pre-drilled as shown): FL184.................TOP LINK FITTING (Rear)............................................................... $ 26.00 each Two needed |
|
KITFOX IV FITTINGS (sold pre-drilled as shown): FL181.................TOP LINK FITTING (Front)................................................................ $ 30.00 each Two needed |
|
STANDARD FITTINGS: FL142................STRUT FITTING (for floats up to #1450)............................................. $ 32.00 each Six needed |
These Kitfox-specific fittings can be added to a standard rigging kit when ordering floats, or can be ordered separately.
First-time buyers: Order the full set and save!
Full set of ten AMF-Kitfox fittings (see above for details - excludes hardware).............. (P/N AFM-KK).........................$285.00/set.
(AFM-KK Weight is 2.35 lbs / 1.06kg)
First-time buyers: Order the full set and save!
Full set of ten AMF-Kitfox fittings (see above for details - excludes hardware).............. (P/N AFM-KK).........................$285.00/set.
(AFM-KK Weight is 2.35 lbs / 1.06kg)
|
4) OLD MOUNTING COMPONENTS PREVIOUSLY AVAILABLE
FROM FULL-LOTUS MFG. Still available in limited quantities - while supplies last... |
|
|
|
Questions or comments about our mounting components?
Email us at myfloat@gmail.com |
Itemized Price List and Availability of "old" EDGE Mounting Components
Note: The components listed below are DISCONTINUED by Aircraft Floats Manufacturing and will only be sold while supplies last.
Substitute with components listed above as applicable...
Note: The components listed below are DISCONTINUED by Aircraft Floats Manufacturing and will only be sold while supplies last.
Substitute with components listed above as applicable...
|
FLEMC.............EDGE C-CHANNELS............................................................ Sold Out (Use the more simple and cheaper FL-E01 from above - will be substituted when ordered) |
|
FLELA.............LOWER STRUT ATTACH....................................................... Sold out |
|
FLEST.............EDGE STREAMLINED STRUT.............................................. Sold out |
|
FLESS.............EDGE SADDLES.................................................................$ 14.70 each |
|
FLESA.............EDGE STRUT STREAMLINE ATTACH...............................$ xx.xx each |
|
|
FLESB.............EDGE SPREADER BAR.....................................................$ xx.xx each |
|
FLEMT1.............EDGE AXLE MOUNTING BRACKET.................................... Sold out |
|
FLEMT2.............EDGE AXLE MOUNTING BLOCK....................................... Sold out |
|
AM600-MNT.......FULL-LOTUS ALUMINUM CASTING................................ $110.00 each Axle mount casting (AM600); also Cross-Tube mount casting (AM601) |
|
AM602-MNT.......FULL-LOTUS ALUMINUM CASTING................................. $56.00 each Connects cross-tubes to struts (AM602) |
You can request a custom-quote in writing for any of the parts and accessories listed above by completing this on-line form.
ORDER HERE!
ORDER HERE!